0
Product is toegevoegd aan uw winkelwagen

Audix TM 1 PLUS

Omni-directional test- en meetmicrofoonset

Prijs op
aanvraag

Voeg dit product toe aan uw offerte

In offerte
Leverings- en Retourbeleid

Vragen? Betere prijs gezien?

Bel 0512 - 340457 of neem contact op!

Product omschrijving

TM1 PLUS

Omni-directional test & measurement microphone kit

The TM1 Plus is a 6 mm pre-polarized condenser microphone used for test and measurement applications. The TM1 is known for its linearity, accurate response, consistency, ease of use, and affordability.

Equipped with a uniformly controlled omnidirectional polar pattern, the TM1 condenser microphone is designed to capture acoustic measurements for room analysis software programs, real-time analyzers, and other sound control devices. With a flat frequency range of 20 Hz – 20 kHz, the TM1 is an excellent tool for sound engineers, sound companies, and recording enthusiasts.

The TM1 omnidirectional test and measurement microphone is designed, machined, assembled, and tested by Audix in the USA.

The TM1 Plus includes calibration data file* and sensitivity, threaded acoustic windscreen, and CA4231 machined calibration adapter.

MODEL VARIATIONS

TM1 – All brass 4-stage construction. Wide and linear response. Requires 18 – 52 V phantom power.

*Bruel & Kjaer® 4231 sound level calibrator or equivalent

FEATURES

  • 6mm pre-polarized condenser capsule
  • Hi SPL response
  • Precision machined brass housings
  • Low noise electronics
  • Replaceable electronics and capsule

APPLICATIONS

  • Test and measurement
  • Real time analyzers
  • Room analysis software programs
  • Ambient room miking

SUPPLIED ACCESSORIES

  • WSTM1 - Threaded acoustic windscreen
  • SMT19 - Shock mount clip
  • TM1CA4231 - Calibration Adapter
  • CD - Sensitivity & calibration data

OPTIONAL ACCESSORIES

  • DCLIP - Heavy duty tension fit mic clip
  • TRIPOD - Tripod mic stand
  • CBL20 - 20’ XLR-XLR quad conductor mic cable
  • P1 - Carrying pouch
  • SMT25 - Shock mount clip

SPECIFICATIONS

Transducer Type: Pre-polarized Condenser

Frequency Response: 20 Hz - 20 kHz +/-2 dB

Polar Pattern: Omni

Output Impedance: 200 ohms

Sensitivity: 6 mV / Pa @ 1k

Maximum SPL: 130 dB with distortion <1% 140 dB Max

Signal to Noise Ratio: 66 dB

Equivalent Noise Level: 28 dB (A weighted)

Dynamic Range: 112 dB

Power Requirements: 24 - 48 V Phantom

Power Consumption: 8.9 mA @ 48 Volts

Connector: Switchcraft® or Audix mail XLR

Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector

Materials / Finish: 4 piece precision machined brass / Nickel Finish

Weight: 132 g / 4.7 oz

Length: 150 mm / 5.9 in

X

Vraag de offerte aan door op bekijk aanvraag te klikken of voeg meer producten toe aan uw aanvraag en klik op 'doorwinkelen'.

Bekijk offerteDoorwinkelen

Het product is toegevoegd aan uw korte verhuur aanvraag. Dit is uw prijs voor 1 week huur of de reeds gekozen periode. Wijzig de huurperiode door op 'bekijk aanvraag' te klikken. Of voeg meer producten toe aan uw aanvraag en klik op 'doorwinkelen'.

Bekijk aanvraagDoorwinkelen

Het product is toegevoegd aan jouw jaarhuur aanvraag. Wijzig de aanvangsdatum door op 'bekijk aanvraag' te klikken of voeg meer producten toe en klik op 'doorwinkelen'

Bekijk aanvraagDoorwinkelen