Ferrofish VERTO MX

Dante is the de facto standard for networking audio equipment. With the Verto MX it’s now possible to easily integrate your existing beloved MADI equipment into a Dante network. Whether mixer or MADI converter – the Verto MX makes all 64 x 64 MADI channels immediately avalilable in the network: “plug and play”.

The ultra compact device has two MADI interfaces, so both optical and coaxial equipment can be connected. If the MADI signal fails, the other interface is automatically switched so that secure redundant operation can be configured.

On the Dante side there are two RJ45 sockets, also prepared for redundant operation. The Verto MX supports up to 192kHz sample rate, MIDI jacks for updates, and BNC wordclock jacks for external synchronization.

Two other Verto versions are available:
32×32 ADAT Interfaces: VERTO 32
64×64 ADAT Interfaces: VERTO 64

ATTENTION: Due to technical limitations the Verto MX does not work with the Blackmagic Constellation series.

Dante I/O

• 2x RJ-45 Ethernet port (PRIMARY/SECONDARY), 1 GBit Network
• 64 x 64 channel I/O (Dante Brooklyn II board built-in)

MADI I/O (AES10)

Coaxial I/O (2 x BNC)
Optical I/O (2 x LC port via SFP, Multimode – Singlemode SFP module optional)
Channel count:

• 64 x 64 channels at 44.1, 48kHz
• 32 x 32 channels @ 88.2, 96kHz
• 16 x 16 channels @ 176.4, 192 kHz

MIDI I/O

• 2 x DIN 5-pin connectors for updating the unit

Wordclock I/O

• BNC: 1 x input, 1 x output
• 75 Ohm Termination set by default (switchable via Dante)

Power Supply

14.4VA (1.2A at 12V)

• Polyfuse internal, self-resetting
• 1 x power supply included

Operation

• Temperature range: 41°F up to 113°F (+5°C up to +45°C)
• Humidity: <75%, non-condensing

Weight/Size

• Weight: 0,9 kg
• Dimensions: 22 x 9 x 4,5 mm (without rack ears)

Optional accessories

• 19“ Rack mountain kit, metal (for mounting 1 x Verto in a 19” rack-space)
• Multi-range Power Supply 12V (EU)
• MADI Singlemode Module
• MADI SC / LC Adapter