Product is toegevoegd aan uw winkelwagenManley ELOP+
Tweekanaals Electro-optical Compressor/Limiter met All-tube Audio Path en Stereo Link
Vragen? Betere prijs gezien?
Bel 0512 - 340457 of neem contact op!
Product omschrijving
ELOP®+
STEREO LIMITER COMPRESSOR
Since the early 1990’s, the Manley ELOP® stereo electro-optical limiter has been a tracking hero - effortlessly controlling dynamics on countless records around the globe and delivering the coveted classic, all-tube sound for which Manley Labs is known. This LA-2A type unit allows for deep amounts of limiting without loss of high frequencies: it literally works (and sounds) like a changing volume control.
The original was super easy to use, with supremely natural sound, and has often been the perfect choice for superstar vocals.
SO HOW DO YOU IMPROVE ON SOMETHING THIS GOOD?
The original Stereo ELOP®, or Electro Optical Limiter, was one of the first Manley products from the early 1990’s. With its through-hole printed circuit board construction and hours of tedious hand-looming, it sure looked like 1992 inside the chassis.
The unit was scrubbed for buildability, embracing modern production techniques. Importantly, the power supply was upgraded to Manley's proprietary MANLEY POWER™ universal voltage Switch Mode Power Supply, which lowered the noise level and made the unit a true world-traveler.
We've also added a 3:1 compression ratio feature which opens up the doors to greater versatility, especially for 2-buss applications. With careful reference to our sonic past, we have deployed our highest performance vacuum tube line amplifier and White Follower output stage in this new version, all housed in a build-efficient chassis behind a drop-dead gorgeous precision-CNC-milled faceplate - all proudly made in America, of course. The new Manley ELOP+ is everything you love about our legendary ELOP, plus!
SPECIFICATIONS
- 10:1 Limiter and 3:1 Compressor ratios
- All-tube audio path uses 5751 (gain) and 6922 (White Follower Output) dual triodes each channel
- Balanced Manley IRON® transformer-coupled XLR Inputs
- XLR impedance-balanced outputs
- BYPASS switches and AUTOMUTE with warm-up delay
- Large illuminated VU meters read Gain Reduction or Output levels
- STEREO LINK
- Side-Chain High-Pass Filter
- Standby Power Consumption: 0.5 Watts
- Universal internal power supply operates worldwide 90-250V~AC 50/60Hz
- ALL-TUBE audio path using a 5751 for gain, 6922 White Follower output tube (one each per channel)
- Silent Conductive Plastic GAIN control.
- Balanced MANLEY IRON Transformer coupled XLR input.
- Input impedance: 14 kOhms
- Maximum input level: +18dBu or 4.8V RMS @ 0.01% THD
- Hi-current White Follower Impedance Balanced XLR output.
- Output impedance=150 Ohms
- Maximum Output with 100 kOhm load= +30dBu @.009%THD+N, BW 22Hz-22Khz, 1Khz sine
- Maximum Output with 600 Ohm load= +20dBu @.015%THD+N, BW 22Hz-22Khz, 1Khz sine
- Output Headroom (Referenced to +4dBu)= 26dB
- Frequency Response= -0.15dB @ 10Hz, -0.1dB @ 20KHz
- Total Harmonic Distortion (1kHz sine @ +4dBu, BW 22Hz-22kHz) = 0.004 % THD+N
- Noise Floor Limiter Bypass= -90dBu (BW 22Hz-22kHz)
- Noise Floor Limiter Engaged= -88dBu (BW 22Hz-22kHz) Input set to Unity gain
- Dynamic Range= 118dB
- Signal to Noise Ratio = 92dB (Referenced to +4dBu)
- Bypass mode = Signal goes thru ALL-TUBE audio path (Bypasses limiter) this is not a “hardwire bypass”
- Unity Gain= Set Input Attenuator @ 1:00 o’clock
- Maximum Gain= 13 dB
- Common-Mode Rejection Ratio (CMRR)= 77dB (BW 22Hz-22Khz, +4dBu, 1Khz sine)
- Limiter Ratio= 10:1
- Compressor Ratio= 3:1
- Limiter: Attack= 15ms
- Limiter Release= 200ms
- Compressor: Attack= 75ms Release= 200ms
- Attack/Release times measured under following conditions: 4dB of Gain Reduction, 1kHz sine, +4dbu Input level, to 63% of total.
- Attack times are faster with higher input levels and heavier gain reduction. Typically for complete release, release times increases up to a couple of seconds, depending upon the amount of previous reduction.
- Maximum Limiting (with +4dBu 1Khz sine)= 12dB
- Maximum Compression (with +4dBu 1Khz sine)= 6dB
- Side-Chain High Pass Filter= 80Hz (Internal user adjust jumper to 150Hz)
- Automute warmup delay=30 seconds
- Operating mains voltage= 90 to 254 VAC (internal universal power supply)
- Mains voltage Frequency= 50-60 Hz
- Power consumption= 26 Watts
- Dimensions= (w,d,h) 19" x 7 x 3 1⁄2" (occupies 2u)
- Unit weight= 9.5 Ib
- Shipping weight= 10 Ib