0
Product is toegevoegd aan uw winkelwagen

United Studio Tech UT FET 47 | B-Stock

Replica van de classic Neumann 47 FET

€ 822,31excl. 21% BTWDit product goedkoper?
Klik hier en word Gouden Klant
€ 995,00incl. 21% BTWDit product goedkoper?
Klik hier en word Gouden Klant

Aantal

Op voorraad. Voor 15:00 besteld, vandaag verzonden

Vragen? Betere prijs gezien?

Bel 0512 - 340457 of neem contact op!

Product omschrijving

LET’S FET IT ON.

It’s a labor of love. The UT FET47 represents several years of R&D, blood, sweat, and tears — all to capture the essence of one of the most beloved and classic solid state condenser microphones, and recreate it for the modern recordist.

The sonic qualities you’ve been chasing have arrived — at an accessible price, with uncompromised quality.

The UT FET47 features a custom Cinemag transformer, a custom Heiserman designed HZ-Series capsule, vintage polystyrene capacitors, and NOS (new old stock) FETs.

Custom parts. Vintage new-old-stock parts. Mix that together with each microphone being built in the USA by actual recording engineers, and you have the UT FET47.

FEATURING HEISERMAN DESIGNED CAPSULES.

We worked with acclaimed capsule designer and manufacturer Eric Heiserman to develop a fresh take on the classic K47 German capsule design. Eric worked with the United team and our capsule manufacturer to develop a new capsule from the ground up, that we are very pleased with. The capsule is open, articulate, and very three dimensional. This process required the analysis of everything from the sourced Mylar to the thread types of screws; but after many months and many iterations, we finally achieved what we had hoped for in the HZ-Series capsules.

While many of the HZ-Series design secrets will remain so, one superior attribute we can reveal is the use of dual, matched backplates. With the HZ-Series matching process, a far more accurate and consistent quality from side to side and capsule to capsule is achieved.

The HZ-Series capsule is still manufactured only a few at a time, and stringently listened to and tested.

 

CUSTOM CINEMAG TRANSFORMERS.

We auditioned many recreations of the original German transformer; but quickly settled on an exceptional offering from Cinemag Transformers in California. Their answer to the classic part is truly a piece of art; a large, hefty transformer made from a ‘striped core’ of interleaved sets of high nickel and steel laminations, and wound to the specs of the original. It‘s humbucking design delivers clean, quiet operation.

While we could have used smaller or less expensive transformer; we simply refused to compromise. We believe you’ll be glad we didn’t. This Cinemag transformer was truly everything we could hope for.

 

IT’S NOT JUST ANOTHER MIC — IT’S A UNITED.

Choosing the best microphone for your needs couldn’t be any more difficult these days. With so many options on the market, and so many claiming to have the vintage sound and failing to deliver, it can be overwhelming.

That was our inspiration: deliver the real product: affordably. The UT FET47 represents our true passion for microphones, and was built with a holistic-design approach. With over 50 years of combined industry experience, we at United have spent years on research and development on this microphone.

We fell in love with a classic all over again, and we can’t wait to hear the recordings you make with it. Check it out at your favorite dealer today!

 

Specifications

TypeCondenser Microphone

CapsuleHZ Series 34mm all-brass, dual-backplate K47

DiaphragmDual-diaphragm, 6 micron, 24k gold sputtered Mylar (PET film)

Power Supply+48v Phantom Power (via XLR)

GroundPin 1 XLR (required)

Frequency Response20 Hz - 20 kHz

Polar PatternCardioid

SPL136 dB (145 dB w/ Pad) @ <.5% THD

Output Impedance200 Ω

Amplifier TypeField Effect Transistor

Self Noise<10 dB (no pad, no HPF)

OutputCinemag USA transformer balanced, pin 2 hot

BodyNickel electroplated, solid milled brass

High pass filter75 Hz (-12dB down point)

Pad-10dB

Connector24k gold plated XLR

MountSelf-contained stand swivel mount adapter

DimensionsHeight: 210mm / 8.2 in.
Width: 69mm / 2.7 in.
Diameter: 63mm / 2.4 in.

Klanten kochten ook

X

Vraag de offerte aan door op bekijk aanvraag te klikken of voeg meer producten toe aan uw aanvraag en klik op 'doorwinkelen'.

Bekijk offerteDoorwinkelen

Het product is toegevoegd aan uw korte verhuur aanvraag. Dit is uw prijs voor 1 week huur of de reeds gekozen periode. Wijzig de huurperiode door op 'bekijk aanvraag' te klikken. Of voeg meer producten toe aan uw aanvraag en klik op 'doorwinkelen'.

Bekijk aanvraagDoorwinkelen

Het product is toegevoegd aan jouw jaarhuur aanvraag. Wijzig de aanvangsdatum door op 'bekijk aanvraag' te klikken of voeg meer producten toe en klik op 'doorwinkelen'

Bekijk aanvraagDoorwinkelen